Description
G4X Plug-in ECUs offer the latest in engine management technology, designed to easily maximise the potential of your car. This ECU fits inside the factory OEM enclosure and installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.
Designed for Honda K20, D17 and K24 powered vehicles.
It shares the processor, firmware and software of the rest of the G4X range and comes with a startup map to get the engine running quickly.
- Please check your connector matches the header in the listed photo before purchasing.
- This ECU works for manual transmissions only.
- Onboard MAP sensor.
- Most factory features are supported.
- This ECU needs an expansion connector before e-throttle is usable.
- Features the new 4-pin powered CAN connector and cannot use the old CANPCB cable: use the CANJST4 cable (Link code 101-0198) to connect CAN devices, which provides not only the CAN connection but also ground and a 12 V supply protected by a self-resetting fuse rated at 3 A continuous.
Suitable applications
- Honda Integra Type R DC5 with K20A/K20A2/K20A3 engine, 2002–2004
- Acura RSX with K20A/K20A2/K20A3 engine, 2002–2004
- Honda Civic Type R EP3 with K20A engine, 2001–2005
- Honda Civic Si/SiR with K20A3 engine, 2001–2005
- Honda Civic DX/LX/HX with D17A1/A2/A3 engine, 2001–2005
- Honda CR-V with K24A1 engine, 2002–2004
ECU features
- Dual CAN bus
- E-throttle control
- Flex fuel
- Built-in trigger oscilloscope
- 3-axis accelerometer
- Selectable temperature input pull-ups
- Flexible engine protection limiters
- CAN keypad control
- VVT control
- Open loop boost control
- Closed loop boost control
- Dual closed loop lambda
- Direct automatic transmission control
- Compatible with all leading aftermarket dashes via CAN or serial stream
- 512 MB of logging memory
Motorsport features
- Nitrous control
- Launch control
- Anti-lag
- Cruise control
- Traction control
- Race timer and power management
- Gear shift control
- Paddle shift control
Specifications
- 2 x CAN bus channels
- LTW 6-pin USB tuning connection
- Inputs and outputs: full list in the installation manual
- Dimensions: 170 mm (L) x 160 mm (W) x 30 mm (H)
- Weight: 260 g
- Operating voltage range: 6.5–24 V
- Maximum input voltage: 36 V
- Maximum continuous current draw: 11.5 A
Box contents
- G4X K20X plug-in ECU
- Anti-static strap
- USB tuning cable (ECU to USB)
- Link stickers
- Plug-in manual card
- Product registration card









Reviews
There are no reviews yet.