Link ECU Razor PDM

Original price was: 1.128,50 €.Current price is: 947,94 €.

Programmable power distribution module: replaces fuses and relays with 4 high power outputs and 8 ADIO pins.

SKU: 135-1000
Category:
Brands:

Description

The Razor PDM (Power Distribution Module) is a programmable power distribution module that replaces traditional fuses and relays: it manages the power supply to fuel pumps, radiator fans, electronic throttles, servos, lights and other loads based on commands from ECUs, CAN keypads, switches or sensors, and can also monitor analog or digital sensor signals.

It continuously monitors the current draw and status of each circuit and reacts in real time to over-current or short circuits, protecting components and reducing the risk of breakdowns. It handles up to 100 A of continuous combined current, with a 160 A non-repetitive peak.

Multiple Razor PDMs can be connected via CAN to get the exact number of inputs and outputs required; their compact size allows them to be mounted close to the loads they control, shortening wiring and reducing voltage drop. With Link ECUs the CAN stream is pre-configured and everything works straight out of the box; with other ECU brands and CAN devices a custom CAN stream is used.

Configuration is done via USB with the free PDM Link software.

Spec overview

  • Can be used with a Link ECU or as a completely standalone device
  • Configurable over-current and short circuit protection, with adjustable trip thresholds and resettable fuse parameters
  • Flexible control strategies: general purpose PID control, math functions, logic expressions and CAN keypad functions
  • CAN keypad buttons can operate Razor PDM outputs, Link ECU functions or both (G5, G4X and G4+ with some limitations)
  • Data logging via CAN or USB for diagnostics, analysis and troubleshooting
  • Multiple units can be connected via CAN for more I/O
  • USB configuration with the free PDM Link software

Inputs/Outputs

  • 4 x high power outputs, 25 A continuous (80 A safe peak), configurable as high side, low side, PWM or paired for H-bridge control
  • 8 x universal ADIO pins, configurable as analog or digital/switched inputs, or as high side outputs up to 8 A each
  • 4 ADIO pins support PWM output; the other 4 support PWM, frequency, duty cycle and speed inputs
  • Software-controlled 4.7 kΩ pull-ups to 5 V
  • Up to 100 A continuous combined output current, 160 A non-repetitive peak

Communications

  • 1 x CAN bus
  • 1 x USB Type-C port for configuration with PDM Link

Electrical

  • Operating voltage range: 6–24 V
  • Maximum input voltage: 27 V
  • Maximum continuous current draw: 140 A
  • Operating temperature: -40 to +80 °C

Physical

  • Dimensions: 103.6 mm (L) x 93.4 mm (W) x 43.2 mm (H)
  • Weight: 475 g
  • Fully sealed, water resistant CNC aluminium enclosure

Box contents

  • 1 x Razor PDM
  • Mounting plate and screws
  • Superseal C plug and pin kit
  • USB-C connection cable
  • Positive terminal insulation boot
  • 2 x high-current ring terminals and bolts
  • Quick start guide

Good to know

The Razor PDM gets hot under large loads: keep this in mind when choosing where to mount it.

Reviews

There are no reviews yet.

Be the first to review “Razor PDM Link ECU”

Your email address will not be published. Required fields are marked *

Related products