Description
The holy grail of ECUs: the latest version released by Link!
Inputs/Outputs
Control any engine with 2 cylinders, all the way up to 12 cylinders, thanks to:
- 12 injector pins
- 8 ignition pins
- 4 injector/ignition dual role pins
Access up to 30 auxiliary pins (when set up for a 4-cylinder sequential engine):
- 8 dedicated auxiliary pins
- 4 shared e-throttle/H-bridge pins
- 2 shared wideband heater pins
- Up to 16 from spare injector and ignition drives
- Any unused injector/ignition pins can be used as an auxiliary pin
- All ignition and auxiliary pins are back feed protected
- 14 analog inputs
- 10 digital inputs
- 4 temperature inputs
- Dual knock inputs
- 2 trigger inputs
- Dedicated ignition switch pin
- 2 x internal wideband lambda controllers
- Dual e-throttle, with internal solid state throttle disconnect relays
- 5V sensor supply
- CAN 1 input now supported via CAN connector
Communications
- USB-C (cable included)
- Connect directly to the ECU via built-in Wi-Fi access point, or add it to an existing network (antenna included)
- Dual CAN (CAN 1 on CAN connector, CAN 2 on header E)
- GPS (antenna included)
Size & weight
- Length: 177.1 mm (6.97 inches)
- Width: 137.3 mm (5.40 inches)
- Min side height: 15.5 mm (0.61 inches)
- Max side height: 40.2 mm (1.58 inches)
- Weight: 795 g (28 ounces)
Connectivity
The G5 Voodoo Pro uses the Super Seal A, B & E plugs and supports USB-C, Wi-Fi, CAN and GPS.
You can connect to your ECU using a standard USB-C cable, or alternatively by using Wi-Fi.
CAN bus 2 has its own dedicated pins in header E, freeing up two digital inputs.
GPS connectivity can be initialised by simply adding a GPS antenna.






Reviews
There are no reviews yet.