AR-Tech EGT module

65,00 €

AR-Tech module for one EGT probe: it reads the exhaust gas temperature and turns it into a controlled 0–5 V output. 5 V power supply. Available in a standard version from 0 to 1300 °C or a high-resolution version from 400 to 1000 °C. Coming very soon with a 1″ display too. EGT probe not included, available in our shop.

Brands:

Description

The AR-Tech EGT module is the module we design and build ourselves to read an EGT (exhaust gas temperature) probe and turn its signal into acontrolled 0–5 V output, to connect to an analogue input of the engine ECU, a dash or a data logger.

Two versions

  • Standard: from 0 to 1300 °C, the probe's full working range.
  • High resolution: from 400 to 1000 °C. The 0–5 V output covers a narrower range, so the reading is finer right where the engine works.

You choose the version when you order.

Coming very soon: a version with a 1″ display that also shows the temperature digitally.

Wiring

  • Power supply: 5 V
  • Input: 1 EGT probe
  • Output: controlled 0–5 V

Recommended probes

The EGT probe is not included: we recommend using the module with Link ECU EGT probes, available in the shop.

Any questions before ordering? Write to us at [email protected].

The first image is an illustrative diagram of the module with the probe; the second shows a Link ECU EGT probe.

At a glance

  • Reads 1 EGT probe
  • EGT probe not included, available in our shop
  • Controlled 0–5 V output
  • 5 V supply
  • Standard version 0–1300 °C or high resolution 400–1000 °C
  • Recommended with Link ECU EGT probes
  • Designed and built by AR-Tech in Italy

Additional information

Version

Standard 0–1300 °C, High resolution 400–1000 °C

Reviews

There are no reviews yet.

Be the first to review “AR-Tech EGT module”

Your email address will not be published. Required fields are marked *