Description
The CoPilot Display 7″ is the digital dash we design and build ourselves for race and tuned cars: all your engine data on a single screen, with high-contrast graphics and the key values always in view, readable at a glance even on track.
The display receives data straight from the engine ECU over CAN bus: it shows the values the ECU is already reading, without wiring the sensors again. Warning lights and alarms are on the same screen, with no extra gauges.
What it shows
- Rev counter with a large central needle
- Oil pressure and temperature
- Coolant temperature
- Fuel pressure
- AFR (air/fuel ratio) and EGT (exhaust gas temperature)
- Battery, engine, oil, coolant and fan warning lights
- Launch control and ALS indicators
The screen layout is defined together with you, based on the car, the ECU and the sensors already fitted.
Compatibility and CAN communication
The display works over CAN bus and takes its data from the engine ECU, which must allow a dedicated CAN stream to be configured. When you buy, we send you the CAN encoding data to set up in the ECU, and our after-sales support stays with you until everything works.
- Link ECU: 100% compatible.
- Other ECUs: compatibility coming soon.
Got a different ECU or need some information before ordering? Write to us at [email protected]: we can also develop the CAN communication for ECUs that are not supported yet.
Custom mounts and dashboards: 3D scanning and 3D printing
The price is for the display without housing. To fit it in your car we offer a 3D scanning and 3D printing service to make custom mounts, bezels and dashboards.
We can also make plug-and-play dashboards that fit in place of the original ones, with no modifications to the car: we 3D scan the original instrument cluster, design the new housing around the display and 3D print it. The photos show a dashboard made this way, from the scan to the part fitted in the car.
Mounts and dashboards are quoted separately, because the work varies a lot from car to car: write to us at [email protected] with make, model and a few photos of the dashboard, we'll work out together how complex the job is and send you a quotation.
At a glance
- 7″ display, supplied without housing
- Data from the engine ECU over CAN bus
- 100% compatible with Link ECU, other ECUs coming soon
- CAN encoding sent by us at purchase, with after-sales support
- Custom mounts and plug-and-play dashboards with 3D scanning and 3D printing, on quotation
- Designed and built by AR-Tech in Italy











Reviews
There are no reviews yet.