Description
Coming soon to the shop. If you're interested, write to us at [email protected]: we'll give you all the details and let you know as soon as it's ready.
The CoPilot Standalone is the data acquisition board we design and build ourselves to keep an eye on the engine without going through the ECU. It doesn't use CAN bus: it reads the sensors directly, so it also suits cars with the original ECU or with an ECU that can't be set up with a CAN stream.
Connected to the CoPilot Display 3.5″ it becomes a complete, self-contained system: the sensors on the engine, the board that reads them and the display in the cabin with the values you need.
Inputs
- Up to 4 additional sensors, each one either pressure or temperature (for example oil and fuel pressure, oil and coolant temperature)
- 1 × 0–5 V input for AFR, to connect to the analogue output of a wideband lambda controller
- 1 EGT input for an exhaust gas temperature probe
- Boost pressure with the sensor on the board, up to 7 bar absolute: just run a small hose from the intake manifold to the board
With the CoPilot Display 3.5″
The display shows the values read by the board on a screen set up for the sensors in your car: bar graphs for pressures, numeric values for temperatures, EGT and AFR, and warning lights that turn red on alarm.
Not sure which sensors to choose or how to wire them? Write to us at [email protected]: we'll help you put together the right system for your car.
At a glance
- Self-contained data acquisition board, no CAN bus communication
- Up to 4 pressure or temperature sensors
- 1 × 0–5 V input for AFR
- 1 EGT probe
- On-board boost pressure sensor, up to 7 bar absolute
- Connects to the CoPilot Display 3.5″
- Designed and built by AR-Tech in Italy







Reviews
There are no reviews yet.