Link ECU Plug-in for Subaru Impreza GC8 WRX and STI V5–V6 1998–2000 (WRX6X)

Original price was: 1.640,90 €.Current price is: 1.378,36 €.

G4X plug-in ECU for Subaru Impreza WRX V5–V6 GC8F/GC8G with EJ20 engine and 4 grey plug ECU.

SKU: 228-4000
Category:
Brands:

Description

G4X Plug-in ECUs offer the latest in engine management technology, designed to easily maximise the potential of your car. This ECU fits inside the factory OEM enclosure and installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.

Designed for the WRX V5 to 6 with 4 grey plug ECU.

It shares the processor, firmware and software of the rest of the G4X range and comes with a startup map to get the engine running quickly.

  • Please check your connector matches the header in the listed photo before purchasing.
  • This ECU works for manual transmissions only.
  • Air temperature sensor highly recommended.
  • Most factory features are supported.
  • This ECU needs an expansion loom before e-throttle is usable.
  • From PCB V1.4 onwards it features the new 4-pin powered CAN connector and cannot use the old CANPCB cable: use the CANJST4 cable (Link code 101-0198) to connect CAN devices, which provides not only the CAN connection but also ground and a 12 V supply protected by a self-resetting fuse rated at 3 A continuous.

Suitable applications

  • Subaru WRX Version 5, GC8F, EJ20 engine, 1998–1999
  • Subaru WRX Version 6, GC8G, EJ20 engine, 1999–2000

ECU features

  • Dual CAN bus
  • E-throttle control
  • Flex fuel
  • Built-in trigger oscilloscope
  • 3-axis accelerometer
  • Selectable temperature input pull-ups
  • Flexible engine protection limiters
  • CAN keypad control
  • VVT control
  • Open loop boost control
  • Closed loop boost control
  • Dual closed loop lambda
  • Direct automatic transmission control
  • Compatible with all leading aftermarket dashes via CAN or serial stream
  • 512 MB of logging memory

Motorsport features

  • Nitrous control
  • Launch control
  • Anti-lag
  • Cruise control
  • Traction control
  • Race timer and power management
  • Gear shift control
  • Paddle shift control

Specifications

  • 2 x CAN bus channels
  • LTW 6-pin USB tuning connection
  • Inputs and outputs: full list in the installation manual
  • Dimensions: 190 mm (L) x 160 mm (W) x 30 mm (H)
  • Weight: 260 g
  • Operating voltage range: 6.5–24 V
  • Maximum input voltage: 36 V
  • Maximum continuous current draw: 11.5 A

Box contents

  • G4X WRX6X plug-in ECU
  • Anti-static strap
  • USB tuning cable (ECU to USB)
  • Link stickers
  • Plug-in manual card
  • Product registration card

Reviews

There are no reviews yet.

Be the first to review “Link ECU plug-in per Subaru Impreza GC8 WRX e STI V5–V6 1998–2000 (WRX6X)”

Your email address will not be published. Required fields are marked *

Related products