Description
G4X Plug-in ECUs offer the latest in engine management technology, designed to easily maximise the potential of your car. This ECU fits inside the factory OEM enclosure and installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.
Designed for the Toyota JZX90 with 1JZ-GTE non-VVT-i engine.
It shares the processor, firmware and software of the rest of the G4X range and comes with a startup map to get the engine running quickly.
- Please check your connector matches the header in the listed photo before purchasing.
- Designed for manual transmission vehicles: for automatic models, contact us to check compatibility with Direct Automatic Transmission Control.
- Onboard MAP sensor.
- Most factory features are supported.
- This ECU needs an expansion connector before e-throttle is usable.
- Features the new 4-pin powered CAN connector and cannot use the old CANPCB cable: use the CANJST4 cable (Link code 101-0198) to connect CAN devices, which provides not only the CAN connection but also ground and a 12 V supply protected by a self-resetting fuse rated at 3 A continuous.
Suitable applications
- Toyota Chaser X90 with 1JZ-GTE non-VVT-i engine
- Toyota Mark II X90 with 1JZ-GTE non-VVT-i engine
- Toyota Cresta X90 with 1JZ-GTE non-VVT-i engine
- Toyota Soarer JZZ30 with 1JZ-GTE non-VVT-i engine
ECU features
- Dual CAN bus
- E-throttle control
- Flex fuel
- Built-in trigger oscilloscope
- 3-axis accelerometer
- Selectable temperature input pull-ups
- Flexible engine protection limiters
- CAN keypad control
- VVT control
- Open loop boost control
- Closed loop boost control
- Dual closed loop lambda
- Direct automatic transmission control
- Compatible with all leading aftermarket dashes via CAN or serial stream
- 512 MB of logging memory
Motorsport features
- Nitrous control
- Launch control
- Anti-lag
- Cruise control
- Traction control
- Race timer and power management
- Gear shift control
- Paddle shift control
Specifications
- 2 x CAN bus channels
- LTW 6-pin USB tuning connection
- Inputs and outputs: full list in the installation manual
- Dimensions: 190 mm (L) x 160 mm (W) x 30 mm (H)
- Weight: 260 g
- Operating voltage range: 6.5–24 V
- Maximum input voltage: 36 V
- Maximum continuous current draw: 8.5 A
Box contents
- G4X JZX90X plug-in ECU
- Anti-static strap
- USB tuning cable (ECU to USB)
- Link stickers
- Plug-in manual card
- Product registration card











Reviews
There are no reviews yet.