Link ECU 4-Channel EGT to CAN Module (TCC04)

268,40 €

CAN module for 4 type K thermocouples: EGT and other temperatures to the Link ECU without using analogue inputs.

SKU: 101-0384
Category:
Brands:

Description

The TCC04 module connects up to four type K thermocouples to the Link ECU over CAN bus, without using any analogue inputs. It is designed for measuring exhaust gas temperature (EGT) on each cylinder, but also suits other temperatures: pre- and post-intercooler, turbo housing, cylinder head, coolant and oil.

Individual cylinder EGTs let you identify cylinder-to-cylinder differences and use the data for tuning, individual cylinder trim and engine protection strategies.

Features

  • 4 x cold junction compensated type K inputs
  • 4-pin DTM connector and standard mini K-type sockets
  • CAN bus connection to the ECU, pre-configured for Link ECU
  • Measuring range: 0–1250 °C, 0.25 °C resolution
  • Accuracy: maximum 2% deviation
  • Detection of short circuit to ground or of a disconnected thermocouple
  • Adjustable sample frequency up to 100 Hz
  • Wireless configuration, updates and live readings from a smartphone or PC

DTM4 connector pinout (Link CAN standard)

The pinout follows Link's CAN pinout scheme and is compatible with the Link CAN cable range.

  • Pin 1: +12 V
  • Pin 2: ground
  • Pin 3: CAN Low
  • Pin 4: CAN High

Wireless configuration options

  • CAN speed: 125 kbit/s, 250 kbit/s, 500 kbit/s, 1 Mbit/s
  • Emulation: standard or all major aftermarket EGT/thermocouple to CAN modules
  • Changeable standard CAN ID
  • Selectable byte order (big/little endian)

Physical

  • Dimensions: 100 mm (L) x 35 mm (W) x 35 mm (H)
  • Weight: 75 g
  • Operating voltage: 12 V

Compatibility

  • All Link ECUs with CAN bus

PC Link calibration

Set-up in PC Link uses the CAN stream file (LCS) supplied by Link: in the CAN Setup dialog, set up a Receive User Stream with the same CAN ID as set in the module and load the matching stream.

Box contents

  • 1 x 4-channel CAN EGT module, custom Link version
  • 1 x DTM4 mating connector kit
  • 2 x Link stickers

Reviews

There are no reviews yet.

Be the first to review “Modulo EGT-CAN 4 canali Link ECU (TCC04)”

Your email address will not be published. Required fields are marked *

Related products