Description
The TCC04 module connects up to four type K thermocouples to the Link ECU over CAN bus, without using any analogue inputs. It is designed for measuring exhaust gas temperature (EGT) on each cylinder, but also suits other temperatures: pre- and post-intercooler, turbo housing, cylinder head, coolant and oil.
Individual cylinder EGTs let you identify cylinder-to-cylinder differences and use the data for tuning, individual cylinder trim and engine protection strategies.
Features
- 4 x cold junction compensated type K inputs
- 4-pin DTM connector and standard mini K-type sockets
- CAN bus connection to the ECU, pre-configured for Link ECU
- Measuring range: 0–1250 °C, 0.25 °C resolution
- Accuracy: maximum 2% deviation
- Detection of short circuit to ground or of a disconnected thermocouple
- Adjustable sample frequency up to 100 Hz
- Wireless configuration, updates and live readings from a smartphone or PC
DTM4 connector pinout (Link CAN standard)
The pinout follows Link's CAN pinout scheme and is compatible with the Link CAN cable range.
- Pin 1: +12 V
- Pin 2: ground
- Pin 3: CAN Low
- Pin 4: CAN High
Wireless configuration options
- CAN speed: 125 kbit/s, 250 kbit/s, 500 kbit/s, 1 Mbit/s
- Emulation: standard or all major aftermarket EGT/thermocouple to CAN modules
- Changeable standard CAN ID
- Selectable byte order (big/little endian)
Physical
- Dimensions: 100 mm (L) x 35 mm (W) x 35 mm (H)
- Weight: 75 g
- Operating voltage: 12 V
Compatibility
- All Link ECUs with CAN bus
PC Link calibration
Set-up in PC Link uses the CAN stream file (LCS) supplied by Link: in the CAN Setup dialog, set up a Receive User Stream with the same CAN ID as set in the module and load the matching stream.
Box contents
- 1 x 4-channel CAN EGT module, custom Link version
- 1 x DTM4 mating connector kit
- 2 x Link stickers






Reviews
There are no reviews yet.