Description
Non-contact Hall effect gear tooth sensor for crankshaft, camshaft and wheel speed sensing. Adaptive dynamic threshold technology automatically compensates for changes in target geometry and air gap, giving reliable detection from near zero speed up to 15 kHz.
Specifications
- Non-contact Hall effect gear tooth sensor
- Adaptive dynamic threshold
- Open collector (sinking current) output
- Near-zero speed sensing
- Maximum tooth frequency: 15 kHz
- Typical air gap: 1.5 mm
- Operating temperature: -40 to +125 °C
- IP67 rated
- Anodised aluminium housing
- 1 m flying lead
Electrical
- Supply voltage: 5–24 V
- Maximum input voltage: 30 V
- Maximum continuous current draw: 6 mA
- Wire gauge: 20 AWG / 0.5 mm²
Wiring
- Brown: supply voltage
- Blue: sensor ground
- Black: output to ECU
Physical
- Dimensions: 120 mm (L) x 15 mm (W) x 15 mm (H)
- Weight: 50 g
Compatibility
- All Link ECUs
- Other aftermarket ECUs
Good to know
- Designed for sensing ferrous trigger wheels and gear teeth.
- An external pull-up resistor is required unless the ECU provides an internal one.
- Observe the recommended target dimensions and air gap for reliable operation.
- Use shielded cable to avoid interference.
Box contents
- Hall effect sensor
- DTM3 connector kit (male and female)
- Printed instructions









Reviews
There are no reviews yet.