Link ECU 2 x CAN Lambda Kits with Bosch LSU 4.9 Sensors (CANLAM)

Original price was: 701,50 €.Current price is: 589,26 €.

Two CAN Lambda kits: digital wideband controller over CAN bus with Bosch LSU 4.9 sensor, no free air calibration.

SKU: 125-9200B
Category:
Brands:

Description

Pack containing TWO complete CAN Lambda kits. The CAN Lambda is a Link module that controls a wideband lambda sensor and sends the measured value to the ECU digitally over CAN bus: the ECU can then correct the mixture in real time, and the reading is also useful for tuning.

Being fully digital, it avoids the signal loss, delays and errors typical of analogue connections. It never requires free air calibration and is compatible with leading aftermarket ECUs.

Specifications

  • 1 x 4-pin male DTM connector (power/CAN)
  • 1 x 6-pin mating connector for LSU 4.9 lambda sensor
  • Sensor: Bosch LSU 4.9
  • Sensing range: 0.67–10 lambda
  • CAN speed: 1 Mbit/s, 500 kbit/s, 250 kbit/s, 125 kbit/s
  • Controller input voltage: 7.5–20 V
  • Sensor input voltage: 10.8–16.5 V
  • Controller input current: 100 mA
  • Sensor heater current: 8 A
  • Operating temperature: -20 to +100 °C

Physical

  • Enclosure: 60 x 26 x 15 mm
  • Lead length: 170 mm
  • Weight: 70 g

Box contents

Each of the two kits contains:

  • CAN Lambda module
  • Bosch LSU 4.9 sensor
  • Deutsch 4-way connector kit
  • Weld-in O2 bung and plug
  • 2 large and 2 small stickers
  • Quick start guide

Good to know

  • With G4+ and G4X plug-in ECUs, a Link CANPCB cable is needed to access the CAN port on the board, plus a Link CANF field-insertable CAN plug.
  • CAN wiring must follow proper CAN protocol (see the CAN Lambda manual).
  • The LSU 4.9 sensor is sold solely for aftermarket use: as Bosch's warranty excludes these applications, no warranty is provided on the sensor.

Reviews

There are no reviews yet.

Be the first to review “Kit 2 CAN Lambda Link ECU con sonde Bosch LSU 4.9 (CANLAM)”

Your email address will not be published. Required fields are marked *

Related products