Description
Genuine Bosch LSU 4.9 wideband lambda sensor for measuring exhaust oxygen content across a wide air-fuel ratio range. With a Link ECU or a compatible wideband controller, it provides fast, accurate lambda feedback for tuning, closed loop fuel control and engine protection.
Specifications
- Genuine Bosch LSU 4.9 wideband lambda sensor
- Planar zirconia (ZrO2) dual-cell sensing element
- Integrated heater
- Measures lambda from 0.65 to lean (infinity)
- M18x1.5 mounting thread, 22 mm hex
- Operating exhaust gas temperature: up to 930 °C
- Short-term exhaust gas temperature: up to 1030 °C
- Supplied with 6-pin LSU 4.9 connector
- Weight: 130 g
Compatibility
- Link ECUs with onboard wideband lambda control
- Link CAN Lambda module
- Other aftermarket ECUs and lambda controllers supporting the Bosch LSU 4.9 sensor
Good to know
- Install where the sensor gets a representative exhaust gas sample.
- Install as close to vertical as practical, with the wiring facing upwards.
- Do not install near the end of the exhaust, where fresh air may affect readings.
- Protect the sensor from condensation and excessive exhaust temperatures.
- The LSU 4.9 sensor is sold solely for aftermarket use: as Bosch's warranty excludes these applications, no warranty is provided on the sensor.
Box contents
- Bosch LSU 4.9 sensor (5 wire)
- 6-pin LSU 4.9 connector
- Printed instructions







Reviews
There are no reviews yet.