Description
2.5 m A loom for Link G4, G4+, G4X and G5 wire-in ECUs.
High-quality pre-assembled loom (also known as a flying lead) for custom installations with compatible Link wire-in ECUs: one end is terminated with the ECU's TE Connectivity SUPERSEAL 1.0 connector, the other end is unterminated. It is a convenient and cost-effective starting point for a professional installation, without the time, tooling and expense of terminating the ECU connector yourself.
All wires are colour coded to match the Link wire-in manuals and all connector positions are populated.
Although designed for Link ECUs, it can also be used in other wiring projects that require the same SUPERSEAL 1.0 connector with a compatible pin configuration.
Compatible ECUs
- All Link G5 wire-in ECUs
- All Link G4X wire-in ECUs
- Link G4+ Atom and Atom II
- Link G4+ Monsoon
- Link G4+ Storm Blue and Storm Black
- Link G4+ Fury
- Link G4+ Xtreme
- Link G4+ Thunder
- Link G4 Storm
- Link G4 RX
- Link G4 Xtreme
- Vi-PEC V44
- Vi-PEC i44
- Vi-PEC V88
- Vi-PEC i88
Good to know
- Link wire-in ECUs with two ECU connectors require both an A loom and a B loom.
- The 2.5 m B loom is sold separately (PN 101-0006).
- Does not suit earlier G4 (pre-G4+) Atom ECUs.
- Also available in 0.4 m and 5 m lengths.
Specifications
- Length: 2.5 m
- Weight: 850 g
- Operating voltage range: 0–24 V
- Maximum input voltage: 60 V
- Maximum continuous current: 5 A and 14 A
- Wire gauge: 20 AWG (0.5 mm²) and 19 AWG (0.75 mm²)
- Connector: TE Connectivity SUPERSEAL 1.0
Link looms use 0.75 mm² wire for the 2 red wires (pins A5 and B5) and the 4 black power grounds (A25, A34, B25, B34); all other wires are 0.5 mm².
Box contents
- 1 x 2.5 m A loom







Reviews
There are no reviews yet.