Description
Plug-and-play adapter to connect a GM LS idle air control (IAC) stepper motor to the Link LS engine harness. Required for cable throttle LS applications, it plugs directly into the pre-wired stepper connector on the harness, with no additional wiring.
Suitable applications
- GM Gen 3 LS1 and LS6 engines
- GM Gen 4 LS2, LS3 and LS7 engines*
- Link Terminated LS Engine Harness (PN 101-0300)
- Cable throttle LS throttle bodies with a factory GM IAC stepper motor
* Gen 4 engines may require additional harness adapters depending on engine configuration: refer to the LS Harness Manual.
Features
- Plug-and-play installation.
- Supports factory GM LS IAC stepper motors.
- Connects to the pre-wired stepper adapter connector on the Link LS engine harness (PN 101-0300).
- Interfaces with Aux 5, Aux 6, Aux 7 and Aux 8.
- Manufactured in the USA.
Physical
- Dimensions: 250 mm (L) x 25 mm (W) x 20 mm (H)
- Weight: 20 g
Good to know
- Required when using the Link LS engine harness with a cable throttle LS engine.
- Not required for drive-by-wire applications: use the Link LS DBW Adapter Loom (PN 101-0304) instead.
- For use exclusively with the Link Terminated LS Engine Harness (PN 101-0300).






Reviews
There are no reviews yet.