Description
The DI Driver-4 is Link's module for direct injection control: an integrated, highly configurable and cost-effective solution to drive most modern solenoid direct injectors and high-pressure fuel pumps.
Each module drives up to four high-voltage peak and hold direct injectors and one peak and hold high-pressure pump, delivering maximum flow even at very high engine speeds. Combining multiple modules with G5 Voodoo ECUs allows up to 12 direct injectors and two independent high-pressure pumps, with direct and staged port injection run on a single tune.
The module connects to the ECU and to other modules via CAN bus; setup is done over USB with the free DI Link software.
Features
- 4 x direct injector drives
- 1 x high-pressure fuel pump drive
- Water resistant, -40 to 80 °C operating temperature
- 1 x CAN bus with software configurable termination
- 1 x USB Type-C for configuration via DI Link software (free download, Windows only)
- Sealed CNC billet aluminium enclosure
- 26-way waterproof Superseal automotive connector (Superseal D plug)
- Compatible with a wide range of engine management systems and solenoid direct injectors (piezo direct injectors not supported)
Electrical
- Operating voltage range: 7–30 V
- Maximum input voltage: 36 V
- Maximum continuous current draw: 10 A
- Max boost current: 17.9 A; max boost voltage: 65 V
- Max peak current: 17.9 A; max peak duration: 2000 µs
- Max hold current: 5.0 A; max hold duration: 164 ms
- Max engine speed with Bosch HDEV injectors: 14,200 rpm
Physical
- Dimensions: 103.6 mm (L) x 86.3 mm (W) x 39.0 mm (H)
- Weight: 438 g
Box contents
- Link DI Driver-4
- Quick start guide
- Superseal D plug and pin kit
- USB-C connection cable








Reviews
There are no reviews yet.