Link ECU G4X StormX + LS Gen 3 Cable Throttle Harness and Fuse Box Bundle

Original price was: 3.196,40 €.Current price is: 2.684,98 €.

G4X StormX ECU with terminated LS engine harness, adapters and fuse box for Gen 3 cable throttle LS V8s.

SKU: 108-9010B
Category: ,
Brands:

Description

A ready-to-go solution to connect a Link ECU to your Gen 3 cable throttle LS V8 (LS1 and LS6). The bundle also includes a fuse box and relay.

Kit contents

  • G4X StormX ECU (8 injector and 8 ignition drives) – 108-4000
  • Terminated engine harness GM LS Gen 3/4 – 101-0300
  • LS stepper adapter harness – 101-0301
  • LS MAP adapter harness – 101-0302
  • LS Gen 3 knock adapter loom – 101-0305
  • LS fuse box and relay – 101-0310

Advanced StormX features

  • Built-in trigger oscilloscope
  • Onboard knock control: two knock sensors wired directly to the ECU, no external amplifier required
  • Open or closed loop boost control with up to three switchable tables
  • Solenoid or stepper motor idle valve control
  • Rotary oil metering pump control
  • Most motorsport features, including full gear shift control, antilag and launch control
  • Up to 4 fully variable closed loop VVT cams

Terminated engine harness

  • Designed to match the PC Link base map I/O setup, so most engines can be made to run with minimal adjustments
  • “Spares” connector with spare I/O for sensors, switches or custom additions
  • Chassis connector with sealed JPT terminals (TE Connectivity JPT family); mating connector specs are provided

With the fuse box, the bundle includes the main chassis flying leads (unterminated wires) for essential power and control:

  • Large red “Batt+” wire (ECU main power)
  • Red-green “Fan” wire (ECU-controlled +12V to the cooling fan), rated 20 A continuous
  • Red-blue “Fuel Pump” wire (ECU-controlled +12V), 20 A continuous
  • Grey-black “Ign Sw” wire (to the ignition switch)

Dedicated harness connectors

  • Pedal: for a DBW pedal, with 5V, sensor ground and two analog voltage inputs
  • CAN2: for CAN devices such as lambda modules, displays, keypads, etc.
  • MAP: compatible with Link MAP sensors; adapter available for factory LS MAP sensors
  • Knock: up to two knock sensors, with adapters available for factory Gen 3 or Gen 4 sensors
  • Alternator: for “F Body” alternators, provides the exciter/lamp wire to terminal B
  • Transmission (“Trans”): for reverse switch, digital input or other functions needing a cabin signal
  • IAC: for a 4-wire stepper IAC; if no IAC is used, these channels can be used for other functions (boost valve, NOS, etc.)
  • TPS: for cable throttle sensors; can be repurposed when using DBW
  • DBW: for electronic throttle bodies, with analog inputs, 5V and sensor ground; can be repurposed on cable throttle engines

Good to know

  • For Gen 4 LS engines, bundle 109-9020B is the better choice.

A PC Link base map for this bundle and the online harness manual are available.

Reviews

There are no reviews yet.

Be the first to review “Kit Link ECU G4X StormX + cablaggio LS Gen 3 farfalla a cavo e scatola fusibili”

Your email address will not be published. Required fields are marked *

Related products